Metal Plate Feeding Step, Stamping Process, Automatic Air Feeder, rod straightening machine, steel coils sheet

The feeding step distance, that is, the feeding length of the single conveying material of the feeder, also referred to as the feeding length, is one of the core parameters of the air feeder.

Its size is determined according to the actual stamping process of the punching die. Different stamping processes have different requirements for the feeding step.

For this reason, the feeding step of the air feeder has a certain adjustment range, and it is an indispensable part to adjust the feeding step of the air feeder every time the new mold is replaced.

The principle of the air feeder is similar to that of a medical injector, which pushes the moving splint through the cylinder to realize the feeding. The adjustment of the feeding step and the actual adjustment of the setting are the moving amount of the moving splint. The specific adjustment steps are as follows:

1. In order to make the movement amount of the moving splint of the air feeder substantially the same as the feeding step, the required number of adjusting feeding step rings are mounted on the center rod.

Special attention should be paid to this operation:

• When installing the adjustment feed step spacer, make sure that the protective gloves are properly worn.

• Do not operate if the air feeder feed step ring is not properly secured. If it falls off during operation, it will cause damage to the air feeder accessory parts.

2. Loosen the locating bolts using the included hex wrench.

3. The micro-adjustment of the feeding step is performed by adjusting the knob of the feeding step fine adjustment screw.

Adjust the gap between the moving splint and the adjustment feed step, or the nylon backing using the vernier caliper.

4. After the measurement is completed, it is necessary to lock the positioning screw, and then fix the feeding step fine adjustment screw.

5. Perform a single stamping test on the punching machine. After multiple times, measure whether the feeding step is in line with the stamping processing requirements. If the step is correct, the automatic continuous stamping can be directly performed; if not, the adjustment step should be re-adjusted.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.